American Pontoon LLC
Manning ,SC 29102
803 478 BOAT
Basic Pontoon Kit


Here is a basic idea of what is included in one of our kits. Just add some marine grade plywood and you are in business.

The basic Pontoon kit contains the Following parts :

(1) 2 aluminum pontoons, each with side and under keels, front water deflectors, full length cross-member supports, sealed chambers at 5 ft. lengths, front eyes, and a rear mounting bracket for fish finder or speedometer.

 (2) U bar cross-members, 2 in. high x width of boat. Additional bars for reinforcement at motor mount and bow.
(3) 4 aluminum diamond plate corners
(4) Aluminum motor support (20 inch transom).
(5) 3 in. wide aluminum edging for complete perimeter and motor box cutout.
(6) Towing bar. All necessary stainless steel nuts, bolts, screws, etc. Assembly booklet.  


No special tools needed

Power Hand Drill & Bits (1/8",3/16",1/4", 3/8", & 9/64" or 5/32"), Drill Drive Bits (for flooring screws), Ratchet Wrench (with 1/4" & 3/8" attachments and same size spanners), Pop Rivet Gun, 25' Measuring Tape, 50 ft. of string, pencil or fine point marker.

             Pontoon Boat Kits that are made to last

Our pontoons are made with type 5052 H32 aluminum, an aluminum / magnesium alloy
most resistant to corrosion in fresh and sea water. The standard thickness is .090" and  , .100", .125" or .1875" is available.
There are solid welded chambers every 5' and each pontoon has a full length under keel and side keel for added protection. And in addition a one piece riser that no other builder provides.

Website Builder